Ampeg SVT-100 Tube question Pics now Pic Heavy kinda

General discussion area for tube amps.

Moderators: pompeiisneaks, Colossal

User avatar
KellyBass
Posts: 433
Joined: Fri May 01, 2009 2:27 pm
Location: Tulsa!

Re: Ampeg SVT-100 Tube question Pics now Pic Heavy kinda

Post by KellyBass »

I've played SVT's for years and thought I knew something about them but, this is a new one on me! I've never seen /heard of one of these before! I want one!!

I recently called LOUD technologies and requested a schematic and they were very helpful...I just had to provide them with a unit serial number.

In the meantime, If you were interested in selling.....? :D
This message has been printed using 100% recycled electrons.
User avatar
tribi9
Posts: 571
Joined: Tue Nov 11, 2008 11:01 pm
Location: KW in ON, Canada.

Re: Ampeg SVT-100 Tube question Pics now Pic Heavy kinda

Post by tribi9 »

Well to be honest I posted on Cl Toronto earlier because I think It is a little too much for what I need. I've been away from home and haven't really played with it much since I got it last week, I was gonna take some measurements to see what's up but haven't gotten around to it...

If you search for it on Craigslist To you will find it. I just posted the add today as a feeler kinda thing....

:wink:
User avatar
selloutrr
Posts: 3694
Joined: Sun Oct 14, 2007 2:44 am
Location: Southern California

Re: Ampeg SVT-100 Tube question Pics now Pic Heavy kinda

Post by selloutrr »

My Daughter Build Stone Henge
User avatar
selloutrr
Posts: 3694
Joined: Sun Oct 14, 2007 2:44 am
Location: Southern California

Re: Ampeg SVT-100 Tube question Pics now Pic Heavy kinda

Post by selloutrr »

since it's a Quad of output tubes you can remove two and run it at half power just make sure you adjust the ohm load.
My Daughter Build Stone Henge
User avatar
tribi9
Posts: 571
Joined: Tue Nov 11, 2008 11:01 pm
Location: KW in ON, Canada.

Re: Ampeg SVT-100 Tube question Pics now Pic Heavy kinda

Post by tribi9 »

Thx Sellout,
I just didn't want to post the link, wasn't sure if I was breaking forum rules... Maybe I should have a look at the rules. :)
Post Reply