Hi all~ It's a fine little tweed-like amp, but it could use a few tweaks in the potentiometer department, like better, smoother & better tapers...
I was hoping that I could throw in a capacitor or some resistor swap to get more of a gradual tone feed, as well as a more even tempered Volume...
OR can this be done only w/a Pot Value change? & if so, to what values & types?
Thanks folks ~
Assistance w/Fender Pro Jr pots.
Moderators: pompeiisneaks, Colossal
-
Stevem
- Posts: 5144
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
Re: Assistance w/Fender Pro Jr pots.
Get a 12AY7 to replace that first 12AX7 in the amp.
This is much easier then changing out a pot or adding a resistor to change the taper of the volume pot.
These tubes seem to have a bit richer tone to me also!
This is much easier then changing out a pot or adding a resistor to change the taper of the volume pot.
These tubes seem to have a bit richer tone to me also!
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!