Fairfield County Signature PCB Set (Compare to Two-Rock JM Sig)

List tube amp related items you wish to sell or trade. Private sales only. No dealers or manufactures.

Moderators: pompeiisneaks, Colossal

Post Reply
User avatar
rccolgan
Posts: 269
Joined: Mon Apr 03, 2017 1:39 am
Contact:

Fairfield County Signature PCB Set (Compare to Two-Rock JM Sig)

Post by rccolgan »

I ordered a bunch of extra PCBs after I designed them for my JM Sig build and I am happy to make them available: https://www.thetonegeek.com/product-pag ... -pre-order
  • 2mm thick board
  • Rugged enough for future rework
  • 4mm minimum traces
  • Standoff locations 1:1 with Ceriatone JM chassis or can be retrofitted in any other amp that has room (Twin Reverb, etc)
  • Eyelet inspired design.
  • Quicker assembly and less chance of issues with underboard wiring
You do not have the required permissions to view the files attached to this post.
Ryan
https://www.thetonegeek.com/
User avatar
rccolgan
Posts: 269
Joined: Mon Apr 03, 2017 1:39 am
Contact:

Re: Fairfield County Signature PCB Set (Compare to Two-Rock JM Sig)

Post by rccolgan »

One super small correction I tracked down is the placement of one of the legs on the .1uf in the phase inverter causing a low-level hum that wouldn't get louder with the gain/master sweep. In green is where the leg of the cap should connect to instead for proper operation.
You do not have the required permissions to view the files attached to this post.
Ryan
https://www.thetonegeek.com/
Post Reply