For those interested I changed a few values to make it work as follows:
I used 50UF on the first and second stage filters. I also had to tweak the bias dropping resistor to 270k to get me appropriate bias range.
I used a hammod organ reverb PT and a JTM style OT, both I had laying arouund. I put the amp in an extra marhsall style chassis and am using a 18 watt combo cabnet. I know that may not be standard, but it sounds great. I used a grounding scheme that is very similar to the one on the Hoffman site, but I borrowed some from Kevin O'Conner's books. Otherwise, it's just as on this site's schematic.
The amp is quiet, no hum, and screams at about "4-5" on the volume. Controlled feedback at "5" and above. Bright, but not too much, probably the open back cabinet.
Thanks for all the help from those on this site.
