Added a node for normal channel stages, changed normal channel stages to .68 bypass over 1k5, normal channel tone to 47k/470p, .022 coupler to 270k right onto vibrato channel input grid. Added IM master in ground flip whole.
It sounds like Stevie Ray Vaughn being thrown off a mountain my Jimi Hendrix and landing on Robin Trower.
Signatures have a 255 character limit that I could abuse, but I am not Cecil B. DeMille.
dbeasley wrote: ↑Thu May 17, 2018 1:49 am
Didn't leo implement a back panel control to tweak the phase shift vibrato that he ended up not using?
I seem to remember that some early Brownface Amps had this hole on the back panel that ended up not being used.
I recall reading the same thing at some point, and seeing a photo of the mysterious unused rear-chassis hole. The conclusion was that the extra control probably wasn't very useful.
If I were to hazard a guess I would say the missing pot would be a 2M lin pot in place of the two 1M resistors that act as grid leak resistors on triode which feeds the PI stage.