#124 Skyliner Odd Layout

Overdrive Special, Steel String Singer, Dumbleland, Odyssey, Winterland, etc. -
Members Only

Moderators: pompeiisneaks, Colossal

Post Reply
User avatar
glasman
Posts: 1446
Joined: Wed Jan 19, 2005 10:37 pm
Location: Afton, MN (St Croix River Valley)
Contact:
Contact glasman

Re: #124 Skyliner Odd Layout

Post by glasman »

Square Style...

http://www.mcmaster.com/#cage-nuts/=12v7qoq
Located in the St Croix River Valley- Afton, MN
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification
www.glaswerks.com
Top
User avatar
glasman
Posts: 1446
Joined: Wed Jan 19, 2005 10:37 pm
Location: Afton, MN (St Croix River Valley)
Contact:
Contact glasman

Re: #124 Skyliner Odd Layout

Post by glasman »

Here is additional detail from CE Dist site. I think everything you need is in the drawings.
You do not have the required permissions to view the files attached to this post.
Located in the St Croix River Valley- Afton, MN
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification
www.glaswerks.com
Top
User avatar
dorrisant
Posts: 2790
Joined: Tue Sep 21, 2010 1:27 pm
Location: Somewhere between a river and a cornfield
Contact:
Contact dorrisant

Re: #124 Skyliner Odd Layout

Post by dorrisant »

glasman wrote:Square Style...

http://www.mcmaster.com/#cage-nuts/=12v7qoq
Looking at the drawing... they didn't dimension the part that needs to fit the 0.410" opening.

I used the old dial calipers and calculator to scale the tech drawing from the 0.52" measurement and they look like they are a perfect fit.

So these should work with this chassis:

Qty - 25 Zinc-Plated Steel
http://www.mcmaster.com/#90680A100 - 8-32 0.064"-0.105" 0.25" 0.52" 25 90680A100 $13.70
http://www.mcmaster.com/#90680A121 - 10-24 0.064"-0.105" 0.25" 0.52" 25 90680A121 $10.42
http://www.mcmaster.com/#90680A126 - 10-32 0.064"-0.105" 0.25" 0.52" 25 90680A126 $10.13

Qty - 5 Stainless
http://www.mcmaster.com/#90680A300 - 10-32 0.064"-0.105" 0.25" 0.52" 5 90680A300 $8.14

Good eye!!

I ordered the 10-32 Zinc Plated nuts...
"Education is what you're left with after you have forgotten what you have learned" - Enzo
Top
User avatar
glasman
Posts: 1446
Joined: Wed Jan 19, 2005 10:37 pm
Location: Afton, MN (St Croix River Valley)
Contact:
Contact glasman

Re: #124 Skyliner Odd Layout

Post by glasman »

dorrisant wrote:
glasman wrote:Square Style...

http://www.mcmaster.com/#cage-nuts/=12v7qoq
Looking at the drawing... they didn't dimension the part that needs to fit the 0.410" opening.

I used the old dial calipers and calculator to scale the tech drawing from the 0.52" measurement and they look like they are a perfect fit.

So these should work with this chassis:

Qty - 25 Zinc-Plated Steel
http://www.mcmaster.com/#90680A100 - 8-32 0.064"-0.105" 0.25" 0.52" 25 90680A100 $13.70
http://www.mcmaster.com/#90680A121 - 10-24 0.064"-0.105" 0.25" 0.52" 25 90680A121 $10.42
http://www.mcmaster.com/#90680A126 - 10-32 0.064"-0.105" 0.25" 0.52" 25 90680A126 $10.13

Qty - 5 Stainless
http://www.mcmaster.com/#90680A300 - 10-32 0.064"-0.105" 0.25" 0.52" 5 90680A300 $8.14

Good eye!!

I ordered the 10-32 Zinc Plated nuts...
They have a good selection. Bill Krinard turned me on to these a while back. Easier to work with and replace than PEM nuts. All of my new chassis designs will use a 10-24 version of the caged nuts.
Located in the St Croix River Valley- Afton, MN
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification
www.glaswerks.com
Top
User avatar
dorrisant
Posts: 2790
Joined: Tue Sep 21, 2010 1:27 pm
Location: Somewhere between a river and a cornfield
Contact:
Contact dorrisant

Re: #124 Skyliner Odd Layout

Post by dorrisant »

Seriously, I placed the order for those cage nut like 5 minutes before my last post. The package arrived in the mail today... Like I ordered them from Jimmy Johns. :shock:


Anyway, they fit perfectly!! :)
"Education is what you're left with after you have forgotten what you have learned" - Enzo
Top
User avatar
M Fowler
Posts: 14036
Joined: Wed Jan 16, 2008 2:19 am
Location: Walcott ND

Re: #124 Skyliner Odd Layout

Post by M Fowler »

Which one fit perfect?
Top
User avatar
glasman
Posts: 1446
Joined: Wed Jan 19, 2005 10:37 pm
Location: Afton, MN (St Croix River Valley)
Contact:
Contact glasman

Re: #124 Skyliner Odd Layout

Post by glasman »

M Fowler wrote:Which one fit perfect?
I think he got the .52" caged units, they look to fit the .41" hole exactly.


This ithe one I think he referenced.

http://www.mcmaster.com/#90680A126

Check the drawings at McMaster.

Gary
Located in the St Croix River Valley- Afton, MN
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification
www.glaswerks.com
Top
User avatar
dorrisant
Posts: 2790
Joined: Tue Sep 21, 2010 1:27 pm
Location: Somewhere between a river and a cornfield
Contact:
Contact dorrisant

Re: #124 Skyliner Odd Layout

Post by dorrisant »

M Fowler wrote:Which one fit perfect?
I ordered these (fit perfect):

http://www.mcmaster.com/#90680A126 - 10-32 0.064"-0.105" 0.25" 0.52" 25 90680A126 $10.13

The others I listed above will fit too.
"Education is what you're left with after you have forgotten what you have learned" - Enzo
Top
User avatar
M Fowler
Posts: 14036
Joined: Wed Jan 16, 2008 2:19 am
Location: Walcott ND

Re: #124 Skyliner Odd Layout

Post by M Fowler »

Thanks guys I will order four plus some other stuff.

I order from them a few times per year great products.
Top
User avatar
glasman
Posts: 1446
Joined: Wed Jan 19, 2005 10:37 pm
Location: Afton, MN (St Croix River Valley)
Contact:
Contact glasman

Re: #124 Skyliner Odd Layout

Post by glasman »

M Fowler wrote:Thanks guys I will order four plus some other stuff.

I order from them a few times per year great products.
They are my source for all hardware, some wire, Rubber for footswitches, garolite, damn near anything. Surprises me the selection they carry.

Gary
Located in the St Croix River Valley- Afton, MN
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification
www.glaswerks.com
Top
Post Reply

Return to “Dumble Discussion”