Edit:Reeltarded wrote:Aha. I based what I said on lots of assumptions. You know what they say. If you assume you make an ass out out cbass.
Shared screen resistor question
Moderators: pompeiisneaks, Colossal
Re: Shared screen resistor question
Re: Shared screen resistor question
Looks like two of the tubes are being sacrificed on the altar of tone. Nothing between the screens and AC ground. I wonder if a screen short would turn the 390R into a fuse before it turned the fuse into a fuse.
- Reeltarded
- Posts: 10189
- Joined: Sat Feb 14, 2009 4:38 am
- Location: GA USA
Re: Shared screen resistor question
Both, it appears. Not fused with a slo fuse either f3A
This is why I don't like 84s even a bit. The tubes are fragile and the amps they build around them are built like cardboard cowboys.
Ping. Ping. Pow.
This is why I don't like 84s even a bit. The tubes are fragile and the amps they build around them are built like cardboard cowboys.
Ping. Ping. Pow.
Re: Shared screen resistor question
These things are known to have bad filter caps. It may have been a bad run of caps but 3 out 5 I've looked at needed some caps changed out. Check them.cbass wrote:Bad filter cap could cause that resistor to blow too.
Also use 2.2k screen resistors with el84s...the tubes will run with less trouble.