Parts source?

[Funkalicousgroove]

Does anyone know where to get the Phenolic Perf Board that Ken Used?

Spade clips?

What Brand are the on/off and Stand by switches in the Komet?

[Justin]

Hello,

Unfortunately, I can't help you with the board and terminals but I can tell you that when I took my Komet 60 apart it had NKK (model S332) on/off and standby switches. The mouser part # is 633-S332 and I believe they are $5.90 ea. They are currently on backorder right now.

[dms]

Hey Justin - what are the Komet's chassis dimensions?

thanks, Davids

[Justin]

David,

The chassis dimensions are 19-1/4" X 7-1/4".

[Funkalicousgroove]

Big thanks on the switches!! Now, anyone have Ideas on the perf board?

[loverocker]

Big thanks on the switches!! Now, anyone have Ideas on the perf board?

Well, I didn't chime in on this because you're all in such a hurry to clone Fran ... but I'll eventually have new stock of repro perf board (the original stuff is long gone). I reckon it's about a week or two away.

See www.ampmaker.com/pb01x.asp for info.

(Mods - please delete if this message is too spammy)

[Funkalicousgroove]

I contacted him actually, nice fellow! (Or are you he?) I also want the board for my JTM45, so I'm not rushing out to clone Franchesca per-se, but I do detest the measure/drill/stake process, and thought this approach would make construction/experimentation and mods much easier.

[loverocker]

Yes - I am he

[Allynmey]

Hi Loverocker, let me know when you get in the Perfboard.

allynmey at aol dot com

[HeeBGB]

Hi Loverocker, let me know when you get in the Perfboard.

allynmey at aol dot com

+1 on this LR

gcbuATyahoo.com

[loverocker]

Shall do - I'd already specced them at JTM45 and 18W size. But I was amazed to see it used in Francesca. I still wonder how Ken got the stuff - I don't think it made it to the USA? Maybe he chopped up an old JTM45 for it!?

[macula56]

great stuff loverocker. now if only i could properly calculate the British to US currency exchange rate. jmac

[Omar]

Big thanks on the switches!! Now, anyone have Ideas on the perf board?

Well, I didn't chime in on this because you're all in such a hurry to clone Fran ... but I'll eventually have new stock of repro perf board (the original stuff is long gone). I reckon it's about a week or two away.

See www.ampmaker.com/pb01x.asp for info.

(Mods - please delete if this message is too spammy)

loverocker
I don't have a problem with you posting since the perf board is so hard to find and your post isn't blatantly spamming.

Can you offer it custom sizes (ie for the power board)?

Omar

[loverocker]

I need to check on whether Fran's power supply board is a cut-down version of the amp circuit board. The Radio Spares blanks were 21x27 holes, and Marshall then sliced them into 7-row (18W) or 8-hole (45W) strips - plus there was the odd power supply board for the first JTM 100Wers.

Bad news is that I've just heard that my perfed boards are 4 weeks away - like I said, I didn't want to say anything until I had this stuff - in perfect quality - in my hands.

jmac - at the mo, the exchange rate is approx 1:1.7 (pounds to dollars).