anyone have dimensions of Princeton reverb chassis ?
Moderators: pompeiisneaks, Colossal
anyone have dimensions of Princeton reverb chassis ?
I am looking for a good mechanical drawing of a Fender princeton reverb chassis. One that would show major cutout openings (like Power tranny, capacitor can, etc)
thanks!
P.
thanks!
P.
Re: anyone have dimensions of Princeton reverb chassis ?
I haven't seen info for a real Princeton chassis only Weber's which is not precise.
You do not have the required permissions to view the files attached to this post.
Re: anyone have dimensions of Princeton reverb chassis ?
The angle on the front panel is different.M Fowler wrote:I haven't seen info for a real Princeton chassis only Weber's which is not precise.
The original is 15°, (75° as shown on the drawing) isn't it ?
rd
Re: anyone have dimensions of Princeton reverb chassis ?
Here's one for the Mojo chassis....I believe it's pretty close.
You do not have the required permissions to view the files attached to this post.
Deric®
Re: anyone have dimensions of Princeton reverb chassis ?
[quote="Deric"]Here's one for the Mojo chassis....I believe it's pretty close.[/quote
Thank you very much, I really appreciate you sharing this!
P.
Thank you very much, I really appreciate you sharing this!
P.
Re: anyone have dimensions of Princeton reverb chassis ?
do you guys think the angle of the front is 15 or 16 degrees?
Re: anyone have dimensions of Princeton reverb chassis ?
Slightly off topic: how many different angles did Fender use? Two Twins and a Bassman I have open at the moment are all 25 degrees. Smaller amps are "flatter?"
Re: anyone have dimensions of Princeton reverb chassis ?
The PR chassis data states 16 degrees angle.
Re: anyone have dimensions of Princeton reverb chassis ?
Where can you access this data?M Fowler wrote:The PR chassis data states 16 degrees angle.
Thanks!
P.
Re: anyone have dimensions of Princeton reverb chassis ?
On the left hand side of the pdf post above.pula58 wrote:Where can you access this data?M Fowler wrote:The PR chassis data states 16 degrees angle.
Thanks!
P.
Mark
Re: anyone have dimensions of Princeton reverb chassis ?
I today measured a Silverface Bassman chassis: 25 degree faceplate angle
Today I also measured a Mojo princeton reverb replica chassis: 24.5 degrees. Probably actually is 25 degress with some measurement error.
Seems like 25 degrees it is!
Today I also measured a Mojo princeton reverb replica chassis: 24.5 degrees. Probably actually is 25 degress with some measurement error.
Seems like 25 degrees it is!
-
vintagedream
- Posts: 6
- Joined: Sat Feb 25, 2012 2:41 pm
- Location: Nova Scotia, Canada
- Contact:
Fender chassis angle
I have been producing Princeton, Bassman, Tremolux etc. chassis for 3 years now and I have found 25 degrees works for my customers.
Re: Fender chassis angle
In this thread is photos of the custom Tremolux chassis I had Vintagedream build for me. Great chassis.vintagedream wrote:I have been producing Princeton, Bassman, Tremolux etc. chassis for 3 years now and I have found 25 degrees works for my customers.
Mark