Tektronix T912 Schematic - manual

[mick]

Hi guys
just acquired a Tektronix T912 which seemed excellent however on the second power up it died and that smell of burning filled the air. I took the case apart and the only damage that was visible was a burnt out resistor, now I believe it's R478 next to C478 and has a diode VR476 in series with it, also it blew the fuse where the large electrolytic caps are on the bottom, I'm sure that something else must have caused this but without a schematic and the component values I wouldn't know where to start looking, the value of the blown resistor would be a good start. Any help would be most welcome, thank you.

Mick

[VacuumVoodoo]

T912 Service Manual it's free but you need to register.

[mick]

VacuumVoodoo thank you so much you are a star, wish I had posted here in the first place.. lesson learned
Mick