General discussion area for tube amps. 
	Moderators:  pompeiisneaks , Colossal 
			
		
		
			
				
								Structo 							 
									
		Posts:  15446 Joined:  Wed Oct 17, 2007 1:01 amLocation:  Oregon
        
                                     
		 
		
						
					
													
							
						
									
						Post 
					 
								by Structo  Sat Oct 09, 2010 7:46 am 
			
			
			
			
			To be fair he did have a donation link on the front page of the site.
I believe it was through Paypal.
But I guess nobody gave. I know I didn't........... 
Tom
						 
		 
				
		
		 
	 
				
		
		
			
				
																			
								marcoloco961 							 
									
		Posts:  356 Joined:  Wed Feb 25, 2009 3:07 pmLocation:  Colona, Il. U.S.
        
                                     
		 
		
						
					
													
							
						
									
						Post 
					 
								by marcoloco961  Sat Oct 09, 2010 3:09 pm 
			
			
			
			
			Structo wrote: To be fair he did have a donation link on the front page of the site.
I believe it was through Paypal.
But I guess nobody gave. I know I didn't........... 
Guess I missed it also. Too busy shuffling through all the cool schematics. OOoops.
 
		 
				
		
		 
	 
				
		
		
			
				
																			
								C Moore 							 
									
		Posts:  1266 Joined:  Mon Oct 22, 2007 9:28 amLocation:  USA, California, 94585
        
                                     
		 
		
						
					
													
							
						
									
						Post 
					 
								by C Moore  Sat Oct 09, 2010 8:02 pm 
			
			
			
			
			I never saw the donation link either. I do not/will not use Paypal, but I am sure he would be happy to take a money order.....
			
			
									
									
						 
		 
				
		
		 
	 
				
		
		
			
				
																			
								paddy 							 
									
		Posts:  112 Joined:  Thu Feb 02, 2006 7:28 pmLocation:  Tasmania, Australia
        
                                     
		 
		
						
					
													
							
						
									
						Post 
					 
								by paddy  Sun Oct 10, 2010 9:33 pm 
			
			
			
			
			I use schematic heaven regularly and am more than happy
			
			
									
									
						 
		 
				
		
		 
	 
				
		
		
			
				
								Structo 							 
									
		Posts:  15446 Joined:  Wed Oct 17, 2007 1:01 amLocation:  Oregon
        
                                     
		 
		
						
					
													
							
						
									
						Post 
					 
								by Structo  Mon Oct 11, 2010 1:03 am 
			
			
			
			
			It may be a dollar late and too short to save it now.
			
			
									
									Tom
						 
		 
				
		
		 
	 
				
				
		
		
			
				
																			
								Andy Le Blanc 							 
									
		Posts:  2582 Joined:  Sat Dec 22, 2007 1:16 amLocation:  central Maine
        
                                     
		 
		
						
					
													
							
						
									
						Post 
					 
								by Andy Le Blanc  Wed Oct 20, 2010 2:19 pm 
			
			
			
			
			Thats very much appreciated....
			
			
									
									lazymaryamps
						 
		 
				
		
		 
	 
				
		
		
			
				
								M Fowler 							 
									
		Posts:  14036 Joined:  Wed Jan 16, 2008 2:19 amLocation:  Walcott ND
        
                                     
		 
		
						
					
													
							
						
									
						Post 
					 
								by M Fowler  Wed Oct 20, 2010 2:27 pm 
			
			
			
			
			Very nice of Doug to take over, thanks Doug. 
 
		 
				
		
		 
	 
				
				
		
		
			
				
																			
								morcey2 							 
									
		Posts:  132 Joined:  Mon May 12, 2008 5:31 pm
        
                                     
		 
		
						
					
													
							
						
									
						Post 
					 
								by morcey2  Thu Oct 21, 2010 12:51 pm 
			
			
			
			
			This isn't the first time that this has happened to schematic heaven.  IIRC, it's happened a couple of times in the 7 years I've been using it.  It went down for a week a month or so ago, came back for a couple of weeks, and then went away again.  My guess is that it'll be back at some point in the near future.  
			
			
									
									
						 
		 
				
		
		 
	 
				
		
		
			
				
								da Geezer 							 
									
		Posts:  253 Joined:  Sat Oct 18, 2008 12:31 pmLocation:  VA, USA
        
                                     
		 
		
						
					
													
							
						
									
						Post 
					 
								by da Geezer  Thu Oct 21, 2010 1:44 pm 
			
			
			
			
			morcey2 wrote: My guess is that it'll be back at some point in the near future.  
Regardless if it comes back or not, you may have missed this post above>>>
The schematics are there.....go check it out.
Geezer
 
		 
				
		
		 
	 
				
		
		
			
				
																			
								paddy 							 
									
		Posts:  112 Joined:  Thu Feb 02, 2006 7:28 pmLocation:  Tasmania, Australia
        
                                     
		 
		
						
					
													
							
						
									
						Post 
					 
								by paddy  Thu Oct 21, 2010 9:21 pm 
			
			
			
			
			Welll done Doug,
			
			
									
									
						 
		 
				
		
		 
	 
				
				
		
		
			
				
																			
								Drumslinger 							 
									
		Posts:  374 Joined:  Wed Nov 23, 2005 4:31 amLocation:  USA
        
                                     
		 
		
						
					
													
							
						
									
						Post 
					 
								by Drumslinger  Fri Dec 10, 2010 3:52 pm 
			
			
			
			
			thanks for the update moondragon.
			
			
									
									
						 
		 
				
		
		 
	 
				
		
		
			
				
																			
								Teleguy61 							 
									
		Posts:  1000 Joined:  Sun Mar 07, 2010 7:26 pmLocation:  Eastern Mass USA
        
                                     
		 
		
						
					
													
							
						
									
						Post 
					 
								by Teleguy61  Fri Dec 10, 2010 3:55 pm 
			
			
			
			
			
Doug is a great guy to deal with, top notch service, and the right stuff on hand.
A stand up member of the tube amp community.
Thanks Doug!
George