Jtm45 preamp tubes

Marshall Amp Discussion

Moderators: pompeiisneaks, Colossal

Post Reply
Kee22
Posts: 28
Joined: Fri Jan 05, 2024 6:12 pm
Location: Sweden

Jtm45 preamp tubes

Post by Kee22 »

Hi
Got a kit amp Jtm45 that sounds great recently installed a ppimv with great result. Thinking about going v1 5751 v2 5751 pi 7025 and 6i6 output tubes. Any comments?
Stevem
Posts: 5144
Joined: Fri Jan 24, 2014 3:01 pm
Location: 1/3rd the way out one of the arms of the Milkyway.

Re: Jtm45 preamp tubes

Post by Stevem »

Let your own ears be your guide .

The most influential tube in any amp is the first preamp tube in each channel.

That tube and its

Gain

Current output

Andthe tone that those two allow sets up the nature and feel thru the whole amp, input jack to speaker.

You should go to the tube amp blue printing site and read the two info papers to be found there about preamp tubes and output tubes .
The info is from 20 years ago, but still fully relevant.
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!

Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Roe
Posts: 1918
Joined: Thu May 31, 2007 2:10 pm

Re: Jtm45 preamp tubes

Post by Roe »

I like the original setup ecc83s and kt66s or 5881s
www.myspace.com/20bonesband
www.myspace.com/prostitutes
Express, Comet 60, Jtm45, jtm50, jmp50, 6g6b, vibroverb, champster, alessandro rottweiler
4x12" w/H75s
User avatar
Olomert Brever
Posts: 24
Joined: Mon Jun 02, 2025 8:25 pm
Location: Nashville

Re: Jtm45 preamp tubes

Post by Olomert Brever »

I just finished a tweed Bassman (very similar to JTM45) and settled on (1) JJ ECC83 MG, (1) JJ 5751, and (1) JJ ECC83 S. The JTM 45 I finished last year I ended up with three Sovtek 12AX7 WBs. "Let your ears be your guide" is excellent advice because each amp is a bit different.
You only YOLO once.
Kee22
Posts: 28
Joined: Fri Jan 05, 2024 6:12 pm
Location: Sweden

Re: Jtm45 preamp tubes

Post by Kee22 »

Ended up with nos Ge 5751 v1 and 2, Tad 7025 pi and tad 6l6 it sounds amazing.
Post Reply