Need some advice for tone stack pot/cap/slope resistor/treble cap on JTM 45/100 for pedal steel guitar or voiced for pedal steel. Anyone.
Mark
Voiced for Pedal Steel Guitar
Moderators: pompeiisneaks, Colossal
-
Stevem
- Posts: 5144
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
F
I don't think you will be too far away if you start off with the values from any black face era Fender , or having all three caps in the 3's if the player wants a tad fatter mids.
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
-
Leo_Gnardo
- Posts: 2585
- Joined: Thu Sep 27, 2012 1:33 pm
- Location: Dogpatch-on-Hudson
Re: Voiced for Pedal Steel Guitar
What Steve said ^. One quick simple EQ change is jumper two pins on a Marshall mid control so you can deep dip mids for a Fender type sound.
down technical blind alleys . . .
Re: Voiced for Pedal Steel Guitar
Thanks for the replies guys I will try out the suggestions.