Hi! Is anyone familiar with
the ADA MicroCab or the ADA Ampulator?
Are these preamps both straight DI units
that can/must ONLY output to recording mixers?
Or, can they be used within a rackmount chain of effects
towards adding tone/sound possibilities?
Can these two preamps output to an amp or another preamp
without recording/mixer board interaction or handshaking?
These two preamps are very interesting.
Thanks for any and all responses.
ADA MicroCab and ADA Ampulator handshaking question
Moderators: pompeiisneaks, Colossal
ADA MicroCab and ADA Ampulator handshaking question
Fan of Fender Trainwreck Dumble
Re: ADA MicroCab and ADA Ampulator handshaking question
Well. I bought the ADA MicroCab. Has not arrived.
It is designed to signal to a mixer/recording application,
but my intention is to keep it within my rackmount
signal chain with a couple of rackmount preamps before
and some rackmount preamps after the MicroCab.
If this works out, I'll be interested in the ADA Ampulator.
Cheers.
It is designed to signal to a mixer/recording application,
but my intention is to keep it within my rackmount
signal chain with a couple of rackmount preamps before
and some rackmount preamps after the MicroCab.
If this works out, I'll be interested in the ADA Ampulator.
Cheers.
Fan of Fender Trainwreck Dumble