Happy Hammond on Craigslist day!

General discussion area for tube amps.

Moderators: pompeiisneaks, Colossal

User avatar
xtian
Posts: 7263
Joined: Mon Apr 19, 2010 8:15 pm
Location: Chico, CA
Contact:

Re: Happy Hammond on Craigslist day!

Post by xtian »

Blackburn wrote:I just gave away my 60s Baldwin Orgasonic about half an hour ago. I removed it from the garage and put it at the side of the house yesterday and today some woman was asking about it. I told her it doesn't work and it runs on tubes. She still wanted it, so we got it into her Jeep and off it went. It had just finished raining too. :o
I was a tube amp, and YOU gave it AWAY? :shock:
I build and repair tube amps. http://amps.monkeymatic.com
User avatar
briane
Posts: 557
Joined: Wed Mar 28, 2007 8:41 pm
Location: seattle

Re: Happy Hammond on Craigslist day!

Post by briane »

it was my happy wurli on cragslist day for me -

traded off an amp I would never play again for a wurli 112A in 'pristine condition' (for these old hunkers - all the parts are there, just needs a tuning - I can do that!

was a damn good week with that and 2 motorbikes in my hands.

-b
it really is a journey, and you just cant farm out the battle wounds
User avatar
Blackburn
Posts: 1765
Joined: Tue Feb 05, 2013 8:39 pm
Location: Texas

Re: Happy Hammond on Craigslist day!

Post by Blackburn »

xtian wrote:
Blackburn wrote:I just gave away my 60s Baldwin Orgasonic about half an hour ago. I removed it from the garage and put it at the side of the house yesterday and today some woman was asking about it. I told her it doesn't work and it runs on tubes. She still wanted it, so we got it into her Jeep and off it went. It had just finished raining too. :o
I was a tube amp, and YOU gave it AWAY? :shock:
:lol:

Well, it had tubes when I got it, much like it had transformers and caps and resistors and even speakers...

I wouldn't call it much of a tube amp any more. Just a nice hardwood box with plastic keys and some grille cloth... I kept all the inserts that had all the resistors and caps and inductors and what not. Good too, because with all that still in there, it would have been very difficult to load. :lol:
User avatar
xtian
Posts: 7263
Joined: Mon Apr 19, 2010 8:15 pm
Location: Chico, CA
Contact:

Re: Happy Hammond on Craigslist day!

Post by xtian »

Now I get it. I'll have to find a home for that carcass when I'm done…
I build and repair tube amps. http://amps.monkeymatic.com
User avatar
Blackburn
Posts: 1765
Joined: Tue Feb 05, 2013 8:39 pm
Location: Texas

Re: Happy Hammond on Craigslist day!

Post by Blackburn »

xtian wrote:Now I get it. I'll have to find a home for that carcass when I'm done…
Man, it was like a gazelle, mostly eaten by a lion and left in the hot African sun for two years... Then rained on... Then taken away by a Jeep. :lol:

I don't leave much. :twisted:
User avatar
xtian
Posts: 7263
Joined: Mon Apr 19, 2010 8:15 pm
Location: Chico, CA
Contact:

Re: Happy Hammond on Craigslist day!

Post by xtian »

Here is a recording. Used three SM57s, L and R side of Leslie, and one on 1x12 cab (this one comes in at the chorus). Hagstrom Viking Deluxe into Egnater Tweaker 15 powering both cabs. No EQ nor FX.

Neighborhood power did not go out this time. Guess I'm losing my touch.
You do not have the required permissions to view the files attached to this post.
I build and repair tube amps. http://amps.monkeymatic.com
User avatar
xtian
Posts: 7263
Joined: Mon Apr 19, 2010 8:15 pm
Location: Chico, CA
Contact:

Re: Happy Hammond on Craigslist day!

Post by xtian »

I rigged the Leslie amp for guitar use. Type 25 booster amp. Voltages look OK (high) with 410 on the plates of the 6l6gc pair. I put 1v p-p sine wave at the input, goes into the PI. The output of the PI is at 20v p-p. Goes to input grids of power tubes. Plates of power tubes show 80v p-p. Goes into primary of OT. On OT secondary, I get 2v p-p. 40:1 turn ratio, right?
You do not have the required permissions to view the files attached to this post.
I build and repair tube amps. http://amps.monkeymatic.com
User avatar
xtian
Posts: 7263
Joined: Mon Apr 19, 2010 8:15 pm
Location: Chico, CA
Contact:

Re: Happy Hammond on Craigslist day!

Post by xtian »

The booster amp works, though it's not suitable as a standalone amp, as it's just a PI and power section. The PT gets warm as it is--I doubt it can support another tube.

Ideas for use?
I build and repair tube amps. http://amps.monkeymatic.com
User avatar
Reeltarded
Posts: 10189
Joined: Sat Feb 14, 2009 4:38 am
Location: GA USA

Re: Happy Hammond on Craigslist day!

Post by Reeltarded »

Build a match and hey dood, welcome to stereo.

:)
Signatures have a 255 character limit that I could abuse, but I am not Cecil B. DeMille.
User avatar
xtian
Posts: 7263
Joined: Mon Apr 19, 2010 8:15 pm
Location: Chico, CA
Contact:

Chop shop

Post by xtian »

Chopped the Hammond organ down to combo size.
You do not have the required permissions to view the files attached to this post.
I build and repair tube amps. http://amps.monkeymatic.com
User avatar
Reeltarded
Posts: 10189
Joined: Sat Feb 14, 2009 4:38 am
Location: GA USA

Re: Happy Hammond on Craigslist day!

Post by Reeltarded »

That looks like it might have been artfully monkeyed in Chino or something. :)
Signatures have a 255 character limit that I could abuse, but I am not Cecil B. DeMille.
User avatar
xtian
Posts: 7263
Joined: Mon Apr 19, 2010 8:15 pm
Location: Chico, CA
Contact:

Re: Happy Hammond on Craigslist day!

Post by xtian »

Chino?!? That's as bad as calling a Scot an Irishman! Fie!

Though it's likely the inmates at the California Institute for Men are better woodworkers than I.
I build and repair tube amps. http://amps.monkeymatic.com
User avatar
Structo
Posts: 15446
Joined: Wed Oct 17, 2007 1:01 am
Location: Oregon

Re: Happy Hammond on Craigslist day!

Post by Structo »

Are you able to change the speed of the Leslie?
Tom

Don't let that smoke out!
User avatar
xtian
Posts: 7263
Joined: Mon Apr 19, 2010 8:15 pm
Location: Chico, CA
Contact:

Re: Happy Hammond on Craigslist day!

Post by xtian »

Structo wrote:Are you able to change the speed of the Leslie?
No. There was a circuit (including an autoformer) to switch the AC to the motor, but I took that out.

But my new, chopped, Hammond organ cabinet, with it's pair of 12" speakers, sounds GREAT. Really wide and full. I'm going to get the AO43 amp working and put it back in the cabinet. This is going to be a handsome "house" combo.
I build and repair tube amps. http://amps.monkeymatic.com
User avatar
Blackburn
Posts: 1765
Joined: Tue Feb 05, 2013 8:39 pm
Location: Texas

Re: Happy Hammond on Craigslist day!

Post by Blackburn »

Love those green caps! :)
Post Reply