The ultimate Fender style footswitch

[Milkmansound]

some pictures - finally got a chance to do another one of these:

[IMG944]http://i896.photobucket.com/albums/ac167/milkmansound/IMG_0304_zpsa46ec768.jpg[/img]

thats the 47k resistor under the heat shrink and a ground was added from the reverb cable shield to the metal switch enclosure

[IMG887]http://i896.photobucket.com/albums/ac167/milkmansound/IMG_0305_zps84c6c32d.jpg[/img]

the switchcraft 90º RCA connectors

[Leo_Gnardo]

Thanks for this advice milkman!

On occasion I've converted the amp end of the cables to quarter inch angle plugs - switchcraft 226 - and mating quarter inch jacks on the amp back panel. Much tougher than most cheezy phono plugs. The angle RCA's in your photo look like they could be roadworthy though. Where do you get them?

[Milkmansound]

there is a link in my initial post - from Mouser.

[angelodp]

Exactly what I was looking for. Perfect solution, thanks for the info and great pic.

Ange

PS I'm building an Encore from scratch with donor materials and this was a much need element. Wish me luck.