General discussion area for tube amps.
Moderators: pompeiisneaks , Colossal
Structo
Posts: 15446 Joined: Wed Oct 17, 2007 1:01 am
Location: Oregon
Post
by Structo » Sat Oct 09, 2010 7:46 am
To be fair he did have a donation link on the front page of the site.
I believe it was through Paypal.
But I guess nobody gave. I know I didn't...........
Tom
Don't let that smoke out!
marcoloco961
Posts: 356 Joined: Wed Feb 25, 2009 3:07 pm
Location: Colona, Il. U.S.
Post
by marcoloco961 » Sat Oct 09, 2010 3:09 pm
Structo wrote: To be fair he did have a donation link on the front page of the site.
I believe it was through Paypal.
But I guess nobody gave. I know I didn't...........
Guess I missed it also. Too busy shuffling through all the cool schematics. OOoops.
C Moore
Posts: 1266 Joined: Mon Oct 22, 2007 9:28 am
Location: USA, California, 94585
Post
by C Moore » Sat Oct 09, 2010 8:02 pm
I never saw the donation link either. I do not/will not use Paypal, but I am sure he would be happy to take a money order.....
paddy
Posts: 112 Joined: Thu Feb 02, 2006 7:28 pm
Location: Tasmania, Australia
Post
by paddy » Sun Oct 10, 2010 9:33 pm
I use schematic heaven regularly and am more than happy
to make a donation.
cheers,
Paddy
Structo
Posts: 15446 Joined: Wed Oct 17, 2007 1:01 am
Location: Oregon
Post
by Structo » Mon Oct 11, 2010 1:03 am
It may be a dollar late and too short to save it now.
Tom
Don't let that smoke out!
Andy Le Blanc
Posts: 2582 Joined: Sat Dec 22, 2007 1:16 am
Location: central Maine
Post
by Andy Le Blanc » Wed Oct 20, 2010 2:19 pm
Thats very much appreciated....
lazymaryamps
M Fowler
Posts: 14036 Joined: Wed Jan 16, 2008 2:19 am
Location: Walcott ND
Post
by M Fowler » Wed Oct 20, 2010 2:27 pm
Very nice of Doug to take over, thanks Doug.
morcey2
Posts: 132 Joined: Mon May 12, 2008 5:31 pm
Post
by morcey2 » Thu Oct 21, 2010 12:51 pm
This isn't the first time that this has happened to schematic heaven. IIRC, it's happened a couple of times in the 7 years I've been using it. It went down for a week a month or so ago, came back for a couple of weeks, and then went away again. My guess is that it'll be back at some point in the near future.
I hope.
Matt
da Geezer
Posts: 253 Joined: Sat Oct 18, 2008 12:31 pm
Location: VA, USA
Post
by da Geezer » Thu Oct 21, 2010 1:44 pm
morcey2 wrote: My guess is that it'll be back at some point in the near future.
I hope.
Matt
Regardless if it comes back or not, you may have missed this post above>>>
The schematics are there.....go check it out.
Geezer
paddy
Posts: 112 Joined: Thu Feb 02, 2006 7:28 pm
Location: Tasmania, Australia
Post
by paddy » Thu Oct 21, 2010 9:21 pm
Welll done Doug,
I am most appreciative.
Cheers,
Paddy
Drumslinger
Posts: 374 Joined: Wed Nov 23, 2005 4:31 am
Location: USA
Post
by Drumslinger » Fri Dec 10, 2010 3:52 pm
thanks for the update moondragon.
Teleguy61
Posts: 1000 Joined: Sun Mar 07, 2010 7:26 pm
Location: Eastern Mass USA
Post
by Teleguy61 » Fri Dec 10, 2010 3:55 pm
Doug is a great guy to deal with, top notch service, and the right stuff on hand.
A stand up member of the tube amp community.
Thanks Doug!
George