Help with Supro "head" ID?

[williamblaak]

Hello all,

I recently found this "head". Someone had chopped it down from a combo (I strongly assume anyway). However there is nothing to indicate what model it is. Was wondering if any of the supro experts on here could help me identify it.

Front:
[IMG:588:384]http://img13.imageshack.us/img13/1460/suprofront.jpg[/img]

Controls:
[IMG:906:514]http://img10.imageshack.us/img10/3193/suprocontrol.jpg[/img]

Guts:
[IMG:762:369]http://img40.imageshack.us/img40/8938/suproguts.jpg[/img]

As I hope you can see from the pics, it has two channels that share a Tone control and trem for "channel two". Tube wise it has a 5U4 rectifier, three 12ax7's and a pair of 7027's.

When I got it the top was mounted so the controls were facing back. I did some twiddling and remounted it so that it's back to facing top (MUCH easier for actually using). Also with the back piece cutout was covering the back of the top chassis, completely sealing in the tubes (figured this was NOT good as there was NO air circulation for the tubes). I also had to make a little bracket to mount the speaker output jack as they had mounted it in the hole you see in the middle of the back plate.

Also it had been spray painted black. Was able to get 'most' of that off with some elbow grease. Looks a bit ragged but I like them that way.

Anyway.... any ideas on what model this "was" or if the power amp even originally went with this amp?

Thanks for any help!

WB

[Structo]

Not real sure but after looking through the schematics, this one is about the only one that seems to fit.

http://www.schematicheaven.com/bargainb ... 1696tn.pdf