For those who know Soldano, I see the two schematics on EL34world.com either power the PI off of “B1”—a node that doesn’t exist on the schematic—or “B2”, the same node that powers the CFs on both sides of the effects loop. Furthermore, the voltage drop listed from the screens to the PI node is about 120 VDC across a 10K resistor. Is there supposed to be a separate node for the loop and PI?
See here:
https://el34world.com/charts/Schematic ... slo100.pdf
SLO100 Power Supply
Moderators: pompeiisneaks, Colossal
SLO100 Power Supply
Just plug it in, man.
-
martin manning
- Posts: 14308
- Joined: Sun Jul 06, 2008 12:43 am
- Location: 39°06' N 84°30' W
Re: SLO100 Power Supply
The loop and the PI are powered from the same node, the one after the 10k, where the two preamp branches originate.
Re: SLO100 Power Supply
Thanks as always, Martin!martin manning wrote: ↑Sun Jun 11, 2023 8:14 pm The loop and the PI are powered from the same node, the one after the 10k, where the two preamp branches originate.
Just plug it in, man.
-
Stevem
- Posts: 5144
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
Re: SLO100 Power Supply
That amp is running those number 2 grids dam hard for not being UL!
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
-
Stevem
- Posts: 5144
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
1 others liked this
Re: SLO100 Power Supply
The max stated design spec for a 6L6GC screen is 450 vdc.
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Re: SLO100 Power Supply
yes, but with 1k screen resistors and typically sovtec 5881s? the power supply should sag some but not much here
www.myspace.com/20bonesband
www.myspace.com/prostitutes
Express, Comet 60, Jtm45, jtm50, jmp50, 6g6b, vibroverb, champster, alessandro rottweiler
4x12" w/H75s
www.myspace.com/prostitutes
Express, Comet 60, Jtm45, jtm50, jmp50, 6g6b, vibroverb, champster, alessandro rottweiler
4x12" w/H75s