Gregg Clark Dumble/Dunble 100w EL34 head

General discussion area for tube amps.

Moderators: pompeiisneaks, Colossal

Post Reply
Alexglazer7
Posts: 6
Joined: Mon Jun 22, 2020 7:57 pm

Gregg Clark Dumble/Dunble 100w EL34 head

Post by Alexglazer7 »

Recently picked up this monster of an amp from guitar center the first day they opened after covid only to remember why i haven't used gc in years... it had 3 blown power tubes and 2 blown pre. Thanks to Jack at rocknroll amps it was fixed super quick and now has replaced all my other amps as my go to! Looking for any info on who made it or what model dumble its inspired by? It has el34 power tubes and 12ax7 pre. Its super heavy at around 45 pounds and has a massive output transformer. Please let me know if anyone has any info on who the builder might be.
Thanks
You do not have the required permissions to view the files attached to this post.
Last edited by Alexglazer7 on Wed Sep 02, 2020 5:48 pm, edited 2 times in total.
Alexglazer7
Posts: 6
Joined: Mon Jun 22, 2020 7:57 pm

Re: Clark Design Howard Amp : Dumble Style : Looking for any info

Post by Alexglazer7 »

Other Pics
You do not have the required permissions to view the files attached to this post.
Mark
Posts: 3271
Joined: Sat Jan 15, 2005 8:10 am
Location: Sydney Australia

Re: Clark Design Howard Amp : Dumble Style : Looking for any info

Post by Mark »

Congratulations on the purchase. The amp isn't a HRM, there are a lot of relays in the amp, five as opposed to the customary two. I thought the #183 had EL-34's and a regular Dumble preamp.

https://ampgarage.com/forum/download/fi ... &mode=view

This is another possibility.

https://ampgarage.com/forum/viewtopic.p ... ansformers
Yours Sincerely

Mark Abbott
Alexglazer7
Posts: 6
Joined: Mon Jun 22, 2020 7:57 pm

Re: Clark Design Howard Amp : Dumble Style : Looking for any info

Post by Alexglazer7 »

Thanks! I posted on some fb group and they mentioned that model too. Guess time to do more research!
User avatar
M Fowler
Posts: 14036
Joined: Wed Jan 16, 2008 2:19 am
Location: Walcott ND

Re: Clark Design Howard Amp : Dumble Style : Looking for any info

Post by M Fowler »

My guess it's a snake by the name of Boldaslove6789 (Gred D Clark) a very untrustworthy ex-Ampgarage member.

Mark
Mark
Posts: 3271
Joined: Sat Jan 15, 2005 8:10 am
Location: Sydney Australia

Re: Clark Design Howard Amp : Dumble Style : Looking for any info

Post by Mark »

Mark, what do you mean by it's a snake?

I'm not familiar with this term. Greg Clark proved to be a snake.
Yours Sincerely

Mark Abbott
User avatar
martin manning
Posts: 14308
Joined: Sun Jul 06, 2008 12:43 am
Location: 39°06' N 84°30' W

Re: Clark Design Howard Amp : Dumble Style : Looking for any info

Post by martin manning »

You and Mark F are on the same page. He's referring to the builder, not the amp.
Alexglazer7
Posts: 6
Joined: Mon Jun 22, 2020 7:57 pm

Re: Clark Design Howard Amp : Dumble Style : Looking for any info

Post by Alexglazer7 »

If this was made by Gregg D Clark, anyone have info on what model ods it might be based off? Any other info would be helpfull
User avatar
pompeiisneaks
Site Admin
Posts: 4244
Joined: Sat Jan 14, 2017 4:36 pm
Location: Washington State, USA
Contact:

Re: Gregg Clark Dumble 100w EL34 head

Post by pompeiisneaks »

Searching for his name and amps I get references to this site and another forum about amps both talking about a debacle. (some kind of snake oil mess I'm guessing?)

https://www.thegearpage.net/board/index ... o.1179203/
and here on ampgarage:
https://ampgarage.com/forum/viewtopic.php?t=19709

I don't on the other hand, see anything on the his website about any dumble clones, I went through the web archive archive.org and still found nothing about it. His site only talks about doing tweed and blackface fender clones and JTM 45 clones.

Sorry there doesn't seem to be much out there... maybe he prototyped a few amps like this and decided it wasn't worth it?

It would require trying to comb over the entire amp and figure out every component value to determine which kind of amp it seemed to replicate, and even then it might not... Sorry there's not much info out there... on the other hand, do you like how the amp sounds?

~Phil
tUber Nerd!
User avatar
drew
Posts: 731
Joined: Wed Jun 21, 2006 2:49 am

Re: Gregg Clark Dumble 100w EL34 head

Post by drew »

The initials on the second to last photo in the top post seem like they could just as easily be “GFC” as “GDC.” Have you guys that are saying this is Gregg Clark, seen this logo elsewhere? Or just taking a guess?

Alex, this looks like someone has combined a Dumble amp with a Dumbleator (normally a separate buffered effects loop unit) and also added some relays, probably to make more features foot-switchable. (Did it come with the footswitch?). Most likely it’s based on one of the several Overdrive Special serial numbers whose circuitry has been photographed and traced and gone into general circulation. If it’s important to you to know exactly what it is, a good tech should be able to look at it and compare it to the known Dumble variants and figure it out. If you posted a bunch of super clear, super well lit, super close up photos of the amp interior, some here *might* take a stab at deciphering it - but no guarantees.
Alexglazer7
Posts: 6
Joined: Mon Jun 22, 2020 7:57 pm

Re: Gregg Clark Dumble 100w EL34 head

Post by Alexglazer7 »

pompeiisneaks wrote: Mon Aug 31, 2020 6:30 pm Searching for his name and amps I get references to this site and another forum about amps both talking about a debacle. (some kind of snake oil mess I'm guessing?)

https://www.thegearpage.net/board/index ... o.1179203/
and here on ampgarage:
https://ampgarage.com/forum/viewtopic.php?t=19709

I don't on the other hand, see anything on the his website about any dumble clones, I went through the web archive archive.org and still found nothing about it. His site only talks about doing tweed and blackface fender clones and JTM 45 clones.

Sorry there doesn't seem to be much out there... maybe he prototyped a few amps like this and decided it wasn't worth it?

It would require trying to comb over the entire amp and figure out every component value to determine which kind of amp it seemed to replicate, and even then it might not... Sorry there's not much info out there... on the other hand, do you like how the amp sounds?

~Phil
Thanks for the help. I was just trying to figure out some things about it i didnt quite understand and thought if i could find who might of built it or which one it was based off. This is my first D-style amp so i wasnt sure what to expect, i have played through a 100 watt plexi and a LP tweed twin. So far i like how it sounds but am not a huge fan of the speakers im playing through (4x12 greenback and 4x12 v30). The amp has a lot of bass in it which i like but i havent had enough time playing with it. Im a big fan of the OD channel and the clean channel, but not the clean channel with the voice toggle pulled. Not sure if the is supposed to be a fat switch or rock, jazz switch
drew wrote: Tue Sep 01, 2020 5:08 am The initials on the second to last photo in the top post seem like they could just as easily be “GFC” as “GDC.” Have you guys that are saying this is Gregg Clark, seen this logo elsewhere? Or just taking a guess?

Alex, this looks like someone has combined a Dumble amp with a Dumbleator (normally a separate buffered effects loop unit) and also added some relays, probably to make more features foot-switchable. (Did it come with the footswitch?). Most likely it’s based on one of the several Overdrive Special serial numbers whose circuitry has been photographed and traced and gone into general circulation. If it’s important to you to know exactly what it is, a good tech should be able to look at it and compare it to the known Dumble variants and figure it out. If you posted a bunch of super clear, super well lit, super close up photos of the amp interior, some here *might* take a stab at deciphering it - but no guarantees.
Thanks for the info. I was curious which model it was based off because i was curious about certain features of the amp. One of those things being that when the effects loop is engaged, i lose a lot a articulation and clarity even with no pedals engaged.If it has a built- in dumbleator, would this account for it or would that be something else. Do i not have the settings correct?
User avatar
drew
Posts: 731
Joined: Wed Jun 21, 2006 2:49 am

Re: Gregg Clark Dumble/Dunble 100w EL34 head

Post by drew »

Found this:
https://reverb.com/item/4826417-d-style ... reamp-2013
Looks to be from the same builder, and the initials do seem to more clearly be GDC. The listing says it was recently serviced by the builder. It’s three years old, but you could contact the seller and ask if they have any info on GDC.

As to the loop, it shouldn’t degrade the sound. What settings are you using on the send and return? Was the tube the loop uses one of the ones the tech replaced?
Alexglazer7
Posts: 6
Joined: Mon Jun 22, 2020 7:57 pm

Re: Gregg Clark Dumble/Dunble 100w EL34 head

Post by Alexglazer7 »

drew wrote: Wed Sep 02, 2020 7:44 pm Found this:
https://reverb.com/item/4826417-d-style ... reamp-2013
Looks to be from the same builder, and the initials do seem to more clearly be GDC. The listing says it was recently serviced by the builder. It’s three years old, but you could contact the seller and ask if they have any info on GDC.

As to the loop, it shouldn’t degrade the sound. What settings are you using on the send and return? Was the tube the loop uses one of the ones the tech replaced?
First thing ive seen that looks similar from an exterior standpoint. I posted on a fb group and an amp builder who went by Dunble wiring looks identical to me. The tube was replaced but im starting to think it has to do with my switcher
Post Reply