Okay, so I need some help reading and putting together a circuit from the schematics below. They show an Excelsior Americana amp that has tremolo on the Treble/Bass (accordion) pre-amp section only, and reverb available to both pre-amp input sections. The amp also keeps the wet reverb from the dry signal, and outputs the wet reverb through a separate power amp and speaker. This gives a wet/dry reverb rig in a single amp. What I need help with is: how/where the pre-amp output (1) connects; how/where the reverb volume pot and foot switch (2 & 3) connects to the reverb amp section (5); how/where the power-amp section connects to the pre-amp section; and, how/where the left reverb input(s) connects (6). The Reverb Input connection was pretty obvious. I've scoured the Internet, and haven't found any real detail of how this goes together. The first PDF shows the power-amp section, and the second PDF shows the pre-amp section. Thanks in advance for your help and insights.
https://www.vintageguitar.com/17184/exc ... americana/
Need Help with a Schematic - Excelsior Americana (Sano)
Moderators: pompeiisneaks, Colossal
-
tubeampkunkie
- Posts: 1
- Joined: Sat Dec 28, 2019 1:05 am
Need Help with a Schematic - Excelsior Americana (Sano)
You do not have the required permissions to view the files attached to this post.
-
Stevem
- Posts: 5144
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
Re: Need Help with a Schematic - Excelsior Americana (Sano)
So you don't have the amp to inspect?
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!