3/8 to 1/2 bushing for mounting pot in 1/2 hole?
Moderators: pompeiisneaks, Colossal
3/8 to 1/2 bushing for mounting pot in 1/2 hole?
Does anyone know where I can find one?
-
Stevem
- Posts: 5144
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
.
In a pinch I have done this, but you will need a hack saw.
Get a fine point sharpie and cut a section out of its cap the lenght that you need, it's not perfect but close enough to to work !
Get a fine point sharpie and cut a section out of its cap the lenght that you need, it's not perfect but close enough to to work !
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Re: 3/8 to 1/2 bushing for mounting pot in 1/2 hole?
That should do it.sluckey wrote:These shoulder washers will work...
http://hoffmanamps.com/MyStore/perlshop ... =692746825
Thank you.