Good Radial Power Supply Caps?

General discussion area for tube amps.

Moderators: pompeiisneaks, Colossal

Post Reply
wattsup
Posts: 118
Joined: Thu Nov 07, 2013 11:00 pm

Good Radial Power Supply Caps?

Post by wattsup »

Are there good brands for radial power supply caps? If there are what should I look for that makes good caps for a power supply?
User avatar
xtian
Posts: 7263
Joined: Mon Apr 19, 2010 8:15 pm
Location: Chico, CA
Contact:

Re: Good Radial Power Supply Caps?

Post by xtian »

I order radials from mouser and newark. Nichicon and Panasonic are good and inexpensive.
I build and repair tube amps. http://amps.monkeymatic.com
User avatar
ToneMerc
Posts: 3480
Joined: Sun Apr 26, 2009 3:55 pm
Location: East Coast

Re: Good Radial Power Supply Caps?

Post by ToneMerc »

wattsup wrote:Are there good brands for radial power supply caps? If there are what should I look for that makes good caps for a power supply?
https://tubeamparchive.com/viewtopic.php?t=10056

TM
wattsup
Posts: 118
Joined: Thu Nov 07, 2013 11:00 pm

Re: Good Radial Power Supply Caps?

Post by wattsup »

Thanks guys. Other than voltage, is there anything specific to look for?
John_P_WI
Posts: 1457
Joined: Wed Aug 15, 2007 4:29 pm
Location: Wisconsin

Re: Good Radial Power Supply Caps?

Post by John_P_WI »

wattsup wrote:Thanks guys. Other than voltage, is there anything specific to look for?
105C temp rating and 10,000 hour life
Stevem
Posts: 5144
Joined: Fri Jan 24, 2014 3:01 pm
Location: 1/3rd the way out one of the arms of the Milkyway.

Re: Good Radial Power Supply Caps?

Post by Stevem »

The F & T brand has been good so far and a good dollar value also!
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!

Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
User avatar
Ken Moon
Posts: 610
Joined: Tue May 08, 2007 2:41 pm
Location: Denver

Re: Good Radial Power Supply Caps?

Post by Ken Moon »

Take a look at the Nichicon PW series.

This is a very nice, long-life cap that is readily available.

http://www.nichicon.co.jp/english/produ ... s/e-pw.pdf

The VZ series is a very popular cap, just not quite as expensive as the PWs, and a hair smaller in most values.

You can go to 450 volts with these, at up to 100uF. The 47uF/450V PW is great for filter caps in a guitar amp.

F&T is great also, as are the BC components caps that are popular in the UK from Farnell, but Newark carries them, as do Mouser and Digi-Key in some values/sizes.
wattsup
Posts: 118
Joined: Thu Nov 07, 2013 11:00 pm

Re: Good Radial Power Supply Caps?

Post by wattsup »

Oh thanks I think that's what I'm wanting to know! You guys rock!! :D
Post Reply