ADA MicroCab and ADA Ampulator handshaking question

General discussion area for tube amps.

Moderators: pompeiisneaks, Colossal

Post Reply
Toppscore
Posts: 288
Joined: Wed Aug 29, 2012 2:02 pm
Location: California

ADA MicroCab and ADA Ampulator handshaking question

Post by Toppscore »

Hi! Is anyone familiar with
the ADA MicroCab or the ADA Ampulator?

Are these preamps both straight DI units
that can/must ONLY output to recording mixers?

Or, can they be used within a rackmount chain of effects
towards adding tone/sound possibilities?

Can these two preamps output to an amp or another preamp
without recording/mixer board interaction or handshaking?

These two preamps are very interesting.
Thanks for any and all responses.
Fan of Fender Trainwreck Dumble
Toppscore
Posts: 288
Joined: Wed Aug 29, 2012 2:02 pm
Location: California

Re: ADA MicroCab and ADA Ampulator handshaking question

Post by Toppscore »

Well. I bought the ADA MicroCab. Has not arrived.
It is designed to signal to a mixer/recording application,
but my intention is to keep it within my rackmount
signal chain with a couple of rackmount preamps before
and some rackmount preamps after the MicroCab.

If this works out, I'll be interested in the ADA Ampulator.

Cheers.
Fan of Fender Trainwreck Dumble
Post Reply