Amp builder for a marshall clone

Jbr13 · Post by **Jbr13** » Tue Jul 30, 2013 7:29 am

I was looking for an amp builder to put together another marshall clone for me. All the amp builders i know are either too busy or under contract and are not able to.
Any ideas?
Thanks

VacuumVoodoo · Post by **VacuumVoodoo** » Tue Jul 30, 2013 9:33 am

I guess presumptive builder's location is irrelevant, since you didn't tell us yours. Give Martin at Marvel Amps a call. His builds are top notch.
http://marvelamps.com/news/tad-jtm45/

Jbr13 · Post by **Jbr13** » Tue Jul 30, 2013 2:23 pm

Since every amp builder i know in Los Angeles is too busy... Im gonna have to find someone outside of LA and deal with shipping.

Structo · Post by **Structo** » Tue Jul 30, 2013 2:25 pm

So you are in LA?

Please put that in your location in your profile, it will help us help you.

Also, what model Marshall are you wanting built?

Many different Marshall's make it a guessing game unless you can be specific.

dorrisant · Post by **dorrisant** » Tue Jul 30, 2013 2:40 pm

There are plenty of builders here... don't know if they would all give up their baby when done.

Like Tom said... post the model number you are looking for and they will surface.

Tony

Jbr13 · Post by **Jbr13** » Tue Jul 30, 2013 2:48 pm

Marshall JTM45 clone

YouTube · Post by **xtian** » Tue Jul 30, 2013 3:28 pm

Fusionbear (Carl) has been doing great work, very to-spec stuff, and posting his build logs here and on TGP. He's in North Orange County, I think. Beautiful work.

And I'm not too shabby, either, if you don't mind hiring a Northern Californian…

Scumback Speakers · Post by **Scumback Speakers** » Tue Jul 30, 2013 4:26 pm

xtian wrote:Fusionbear (Carl) has been doing great work, very to-spec stuff, and posting his build logs here and on TGP. He's in North Orange County, I think. Beautiful work.

And I'm not too shabby, either, if you don't mind hiring a Northern Californian…

I can vouch for Carl's work. He built this SL using some NOS mustards, a Valvestorm kit, and some trannies from Mercury Magnetics. TGP thread link below.

http://www.thegearpage.net/board/showth ... ?t=1286094

I've been having him do my bias/service work on my demo amps for about a year now.

Email me if you need any specific info or help.

Jim

sales at scumbackspeakers.com

Blackburn · Post by **Blackburn** » Tue Jul 30, 2013 5:35 pm

Damn! That's one nice SL!

Scumback Speakers · Post by **Scumback Speakers** » Wed Jul 31, 2013 2:24 am

Blackburn wrote:Damn! That's one nice SL!

Yep. I had a hand in this. I spec'd the trannies, the tubes used, supplied the NOS mustard caps and the head cab. The rest of it was all Carl with a Valvestorm kit and his lead dress/wiring skills, etc.

And one of my 69 spec slant naked cabs with an M75/H75 16 ohm 65w mix in the cab.

It rocks.

Reeltarded · Post by **Reeltarded** » Wed Jul 31, 2013 4:31 am

That is epic. I always admire his work.

MHProd · Post by **MHProd** » Thu Aug 01, 2013 12:00 am

Chris Merren has my vote if you want something sounding like an original JTM45.

Tube Amp Archive

Amp builder for a marshall clone

Amp builder for a marshall clone

Re: Amp builder for a marshall clone

Marshall clone amp builder

Re: Amp builder for a marshall clone

Re: Amp builder for a marshall clone

Re: Amp builder for a marshall clone

Re: Amp builder for a marshall clone

Re: Amp builder for a marshall clone

Re: Amp builder for a marshall clone

Re: Amp builder for a marshall clone

Re: Amp builder for a marshall clone

Re: Amp builder for a marshall clone