Egnater Rebel 20 Voltages

[dorrisant]

Can anyone here help me? I'm replacing the B+3 filter cap (c129) and was wondering if I could use a 350v rated cap in that spot.

I traded some gear for this amp in non-working condition. Burnt dropping resistor (r118). Filter cap c117
had arced between the cap and pcb leaving carbon and therefore a dead short. I cleaned that up, replaced r118 and moved B+3 filter cap (c129) over to replace c117 in the hopes of getting an answer. If 350v will work, I can get it fired up tonight!!

If not, 47uf 450vs are on there way!

Thanks in advance!
Tony

[M Fowler]

No that c117 is the screen grids supply use 47uf/450v

[dorrisant]

No that c117 is the screen grids supply use 47uf/450v

Gotcha on that, Mark... What about c129, B+3? Wondering if a 47uf 350v would hold there.

Tony

[M Fowler]

I would not go below 450v on those caps even c129 the preamp filter cap.

[dorrisant]

Thanks Mark! Quick answer.

I will wait on delivery.

Tony

[M Fowler]

Tony,

Glad to help anyway I can. Email me for some data.

[dorrisant]

I popped in a 22uf/450v temporarily... Looks like 367v on that B+3 filter cap.

Waiting on replacements... Thanks again Mark!

Tony

[dorrisant]

AMAZING!!! I ordered these caps at 5:30 pm on yesterday... They were in the mailbox today at 3:00pm. I feel like I've been in a time warp or something like that. How does someone ship USPS First Class form Freehold, New Jersey to Evansville, Indiana (800+ miles), in less than 24 hours? Exactly the same brand as what was in there stock.

http://www.tuberadios.com/capacitors

Or "flurotron" on eBay.

I will order from him again!

Tony

[xtian]

Wow. Must be part of the NSA spying program. Thanks, government!