Theile 1x12 plans

[UR12]

remember they are so small that most head cabs will stick out on either side. If you look at mine, that head on one cab would have the rubber feet dangling. The vibration makes them slide around plus it looks like Robbie the Robot.

Give a little thought to how your rig ought to look so you don't end up putting the head on the floor. sh

Depends on the head cab Just get two their small

[M Fowler]

Dana,

You don't advertise these cabs on your website word of mouth only?


Mark

[UR12]

Dana,

You don't advertise these cabs on your website word of mouth only?


Mark

We Just started selling them and I have't had time to update the webpage.
They are now an option with our Lil Devil amp. The EV12L in this cab does 103db with one watt so it just complements the 2 watt Lil Devil so well. But having said that, it sounds great with even 100 watts. We offer the 12L, Fane Medusa (103db) or an Eminience Delta 12a.

I would like to invite anyone on facebook to check us out at Hall Amplification. It is a closed group but just ask for addmission and you can keep up with the lastest stuff going on. We got Tshirts too

[MCK]

Congratulations! Lil' Devil and Thiele + EVM12L really work well together!

[Structo]

Yeah there was a member or two that built larger TL806's so that the amp head wasn't wider than the speaker cab.

They built the expansion part so it is sealed and doesn't affect the speaker volume.

Personally I would widen it the other way so that the cab sits vertical but apparently it doesn't affect the sound to have it laying down.

[kevster]

Yeah there was a member or two that built larger TL806's so that the amp head wasn't wider than the speaker cab.

They built the expansion part so it is sealed and doesn't affect the speaker volume.

Personally I would widen it the other way so that the cab sits vertical but apparently it doesn't affect the sound to have it laying down.

Actually, the wide TL806 is what I plan to build first, but with the front "lip" also extended for protecting/providing space for the fixed mic.

The "unused" end with be a storage compartment for the cables.

[katopan]

The "unused" end with be a storage compartment for the cables.

Now that's a damn good idea.

[wavetuner]

These are mine. One is an EVM12L and the other uses a Swamp Thang. Very versatile, not subtle, even response and extraordinarily heavy for the compact size. Mine are oak so I added a couple pounds unnecessarily but if they were made of pine they would still be a load. sh

Ha ha,
I am building a d-lator in a re-purposed D-link 26 port 1U rack chassis. That Cisco was an expensive piece of computer gear not so long ago - good to see it in such a class act! Those EV cabs are very cool. When the EV guitar speakers came out, they caught fire. As I recall, they were the only speakers that Garcia couldn't blow up in dimed Twin Reverbs in the end of the 60's or so.

Your rig is too cool, an audiophile's guitar setup Nice.
Jim

[CHIP]

I built one a few years ago, and adjusted the dimensionns so my head cab would match the Thiele cab. It's 21.5" wide X 14.5 "high X 10.75 " deep. overall. Inner dimensions were 20" X 13" X 8.532" which made my volume right in line with the thiele inner volume.

[Goldhedge]

I just found the builder's plan here:

http://tubenexus.com/wp-content/uploads ... _Plans.pdf

and I attached the pdf...