Burned Plug

General discussion area for tube amps.

Moderators: pompeiisneaks, Colossal

Post Reply
C Moore
Posts: 1266
Joined: Mon Oct 22, 2007 9:28 am
Location: USA, California, 94585

Burned Plug

Post by C Moore »

My step daughter said "Oh, it has been like that for a few years." She cannot remember what caused it. I am installing a new plug for her......
You do not have the required permissions to view the files attached to this post.
User avatar
xtian
Posts: 7263
Joined: Mon Apr 19, 2010 8:15 pm
Location: Chico, CA
Contact:

Re: Burned Plug

Post by xtian »

It's vintage. Someone will buy it for the tone.
User avatar
Richie
Posts: 1175
Joined: Mon Jan 09, 2006 3:44 am
Location: Ky

Re: Burned Plug

Post by Richie »

usually when you have a cord or plug that looks like that,its off a heater or hair dryer or similar. If the ground side starts to loosen or fray inside the cable, or where it attaches. Or a couroded outlet ground side,not makeing good contact, this will make the plug melt.
You might also look at the socket it was plugged into,and change that too,just to be safe. But i bet, you look into that cabble, the ground side will only have a few strands making contact.
paulster
Posts: 1299
Joined: Tue Oct 10, 2006 5:08 pm
Location: Los Angeles & London

Re: Burned Plug

Post by paulster »

I've got to say that US plugs and sockets are the most under-engineered I've ever seen, which is all the more impressive since at 120V comparable appliances are pulling twice the current of their European equivalents.

When you compare a Nema plug to a Schuko or (even better) a BS1363 UK plug it's amazing they are rated for 15A.

You often find plugs which are hot in the sockets because of making poor connection, and the heat then worsens the problem.

The newer Nema outlets are much better that the older ones with the individual slightly concave faces though, and actually grip the plugs now!
Drumslinger
Posts: 374
Joined: Wed Nov 23, 2005 4:31 am
Location: USA

Re: Burned Plug

Post by Drumslinger »

yes, take a look at the plug as well. I was just reading about someone getting ready for a gig on stage and he plugged his amp in to the wall recepticle which happened to be wired wrong (hot and ground switched). you can imagine what happened when he flipped the switch.
iknowjohnny
Posts: 1070
Joined: Thu Apr 24, 2008 2:10 am
Location: los angeles

Re: Burned Plug

Post by iknowjohnny »

Personally i would put it on ebay as a "relic". No doubt it's worth big bucks. doesn't look faked at all :lol:
User avatar
Structo
Posts: 15446
Joined: Wed Oct 17, 2007 1:01 am
Location: Oregon

Re: Burned Plug

Post by Structo »

paulster wrote:I've got to say that US plugs and sockets are the most under-engineered I've ever seen, which is all the more impressive since at 120V comparable appliances are pulling twice the current of their European equivalents.

When you compare a Nema plug to a Schuko or (even better) a BS1363 UK plug it's amazing they are rated for 15A.

You often find plugs which are hot in the sockets because of making poor connection, and the heat then worsens the problem.

The newer Nema outlets are much better that the older ones with the individual slightly concave faces though, and actually grip the plugs now!
I have to agree.

Even after the USA changed to the three prong cord which is better and more sturdy of a connection, it's not all that great.

I think the biggest problem is making sure new appliances can plug into old wiring so they have kept the two prongs the same, although the neutral tang is wider.
Otherwise home owners would be forced to re-wire their homes which is a good idea but many couldn't afford to do that.
Tom

Don't let that smoke out!
Post Reply