Parts list for Dumble ODS 50

[Ellicaster]

Does anyone have a suggested list of parts (and numbers) to build an ODS 50 Dumble clone combo, i.e. capacitors and values, resistors, pots, etc? Please advise. Many thanks. I'd like to start picking up a few things here and there.

Ellis

[strat57]

I'm going to join you in that search. Forum members "Funkalicousgroove", "Normster", "Brownote" and some others on here have some nice clones with Visio files to view.

"Funkalicousgroove" seems to have the best looking chassis...... he had some with the Dumble ODS logo. That's what I'd Like to get. But I think his was a 100 watt'r if I'm not mistaken. Brownote is selling kits now for a D-Lite which sounded pretty darn good in the clips. My brother has ordered one so we'll see. I hope it turns out sweet!

[fabiomayo]

There are a lot of advice here regarding parts to use.

My experience is very limited and a search will offer your answers.

Anyway, Vishay/Dale RN65 metal film resistors in the preamp tubes' plates
and TS slope, caps are usually Orange Drop 6PS series or Xicon MPP (this is
a very interesting topic and many discussions have already happened),
2w metal oxide resistors seems to be the standard in the power supply.
Most pics I've seem of clones have carbon film resistors (1w?) but some
do use carbon comps.

There are a few BOMs with Mouser part numbers on the files section which
are really useful.

Hope this helps.

[Ellicaster]

Thanks for your replies.

Ellis