The earth ground of the IEC connector is fully connected to the housing of the connector and the housing is fully connected to the chassis and my electrical earth-point. The circuit earth can be lifted, see schematic. So it must be safe I guess...Structo wrote:Nice pics!:D
I notice you don't have the earth ground on the IEC connector connected to chassis ground.
Are you planning on leaving that as so and doesn't that create a shock hazard in the event of a short to chassis ground?
Dumbleator inspired FXLoop & Mixer
Moderators: pompeiisneaks, Colossal
Re: Dumbleator inspired FXLoop & Mixer
Re: Dumbleator inspired FXLoop & Mixer
Ah, I see it now.
Thanks for the clarification.
Thanks for the clarification.
Tom
Don't let that smoke out!
Don't let that smoke out!