RELAY SWICHING - ON BOARD AND REMOTE

cornel moldovan · Post by **cornel moldovan** » Sat Apr 25, 2009 7:35 pm

Hi everyone.. please take a look at my schematic .. waiting for suggestions..

Structo · Post by **Structo** » Sat Apr 25, 2009 8:02 pm

I'm not too good at hand drawn schematics but I will attach some relay info I have.

heisthl · Post by **heisthl** » Sat Apr 25, 2009 11:24 pm

You don't have to dedicate a wire for led power or use anti-pop caps this method works fine and doesn't require the DPDT switches:

angelodp · Post by **angelodp** » Sun Apr 26, 2009 5:10 pm

Here is how I worked out my three button switch.

[IMG

846]http://i260.photobucket.com/albums/ii9/ ... 5-jpeg.jpg[/img]

cornel moldovan · Post by **cornel moldovan** » Tue Apr 28, 2009 8:56 pm

hello again.. i most enjoy the pictures .. and schematics...even hand drawed sketches.. have fun.. some are placing the swich xlr on the front ..

Structo · Post by **Structo** » Tue Apr 28, 2009 9:47 pm

Yeah it would probably be more user friendly to have it on the front panel but real estate and aesthetics probably come into play, forcing most builders to put it on the rear panel.
And of course there is the way HAD did it as well.

JammyDodger · Post by **JammyDodger** » Tue May 12, 2009 11:27 pm

Hey All,

Someone on the forum had the boards for sale. Does anyone remember who that was?

Cheers, Mike

Structo · Post by **Structo** » Tue May 12, 2009 11:34 pm

Try Ampdoc

Tube Amp Archive

RELAY SWICHING - ON BOARD AND REMOTE

RELAY SWICHING - ON BOARD AND REMOTE

Re: RELAY SWICHING - ON BOARD AND REMOTE

Re: RELAY SWICHING - ON BOARD AND REMOTE

One version of 3 button

actual

Re: RELAY SWICHING - ON BOARD AND REMOTE

Relay Boards

Re: RELAY SWICHING - ON BOARD AND REMOTE