Aussie bound clips

Overdrive Special, Steel String Singer, Dumbleland, Odyssey, Winterland, etc. -
Members Only

Moderators: pompeiisneaks, Colossal

Post Reply
groovtubin
Posts: 1114
Joined: Tue Feb 07, 2006 4:52 am

Aussie bound clips

Post by groovtubin »

http://www.myspace.com/omegaamps

simple, 4 x 12 electric cab w/man o`wars,,,
dry, NO nuthin added, clean pre at (4) OD pre at (4) , od vol at (7) even at this vol level, it wasn`t frighteningly loud, just VERY dynamic. I didn`t use too much finger english on purpose, just wanted the sound to come thru, i`ll put better ones up soon as i can
jim
User avatar
jelle
Posts: 2391
Joined: Sat Feb 04, 2006 7:55 pm
Location: New Jersey

Re: Aussie bound clips

Post by jelle »

Jim,

This sounds very good! I like the clear cleans and the OD note bloom! 8)

PM sent.

Jelle
User avatar
Bob-I
Posts: 3791
Joined: Thu Feb 02, 2006 10:06 pm
Location: Hillsborough NJ

Re: Aussie bound clips

Post by Bob-I »

Very nice overall. I found the clean clip to be a tad brittle, and the OD clip a tad wooley and dark. I'm sure twisting knobs would make it to my liking though.
User avatar
mat
Posts: 929
Joined: Tue Apr 04, 2006 8:52 pm
Location: Helsinki, Finland

Re: Aussie bound clips

Post by mat »

Cool sounds !

Did You have the guitar tone rolled back on the OD clip ? PAB on or off on the clips ? Beautiful feedback 8)
mat
groovtubin
Posts: 1114
Joined: Tue Feb 07, 2006 4:52 am

Re: Aussie bound clips

Post by groovtubin »

mat wrote:Cool sounds !

Did You have the guitar tone rolled back on the OD clip ? PAB on or off on the clips ? Beautiful feedback 8)
THANK YOU!! Tone wasn`t rolled off.....The biggest thing is its a 4x 12 cab, i used VERY little PICK attack, and forgot i had the MID boost on,,the bridge p/up on my PRS is a HFS also known to be DARK< plus the prescence was at 4. It was JUST a pre-emptive attempt to share the amp. The amp didn`t have a outboard loop either, the amp is def touch sensitive, its almost weird!!

thanks again, jim
groovtubin
Posts: 1114
Joined: Tue Feb 07, 2006 4:52 am

Re: Aussie bound clips

Post by groovtubin »

mat wrote:Cool sounds !

Did You have the guitar tone rolled back on the OD clip ? PAB on or off on the clips ? Beautiful feedback 8)
PAB is on.. amazing that the amp isn`t like LIUD as hades, it`s very comfortable to get these sounds at speaking volume, the amp would BLLOM at settings of 3 and 3 on drive and level, i NEED to dial in the HRM, fer sure!! Live its not NEAR as dark as the clip seems,,
Fischerman
Posts: 819
Joined: Thu Dec 07, 2006 3:47 pm
Location: Georgia

Re: Aussie bound clips

Post by Fischerman »

I like the base tone. Jim, my HRM amp doesn't have anywhere NEAR that amount of gain with CL vol on 4 and Drive on 4...not even close. Must be the white box...do you have the Mouser part number for that? :lol:
Post Reply