5/16 Tip Jack Part Number

[Smitty]

What tip jack are you using in the CE chassis for bias test points?

5/16" (.3125") D-shaped hole.

After an hour of searching this site and the Internet I'm waiving the white flag.

[martin manning]

Standard banana jack.

[dorrisant]

deleted

[ToneMerc]

Here's what I was using in those chassis, Kobicon 164-R116B & 164-R116R


http://www.mouser.com/ds/2/209/KC-301107-199024.pdf

TM

[UltraHookedOnPhonix]

Here's what I was using in those chassis, Kobicon 164-R116B & 164-R116R


http://www.mouser.com/ds/2/209/KC-301107-199024.pdf

TM

Those are non-stocked at Mouser I'm afraid.

These Keystone parts looks like a viable alternative:

Mouser part#: 534-6091 (red)
http://www2.mouser.com/ProductDetail/Ke ... 9ODiwme4hs
Mouser part#: 534-6092 (black)
http://www2.mouser.com/ProductDetail/Ke ... c7gYOuapbc

[M Fowler]

Hoffman Amps has those available for sale.

[MakerDP]

https://www.tubesandmore.com/products/t ... ted-deluxe

[Smitty]

Thanks for your input guys but not looking for banana jacks or other size holes. Need a tip jack to fit a 5/16" (.3125") D-shaped hole. If anyone has a source I'd really appreciate it.

[ToneMerc]

Thanks for your input guys but not looking for banana jacks or other size holes. Need a tip jack to fit a 5/16" (.3125") D-shaped hole. If anyone has a source I'd really appreciate it.

The Kobicon part numbers that I referenced and have used were taken from the CE chassis CAD drawing, which obviously is setup for the larger form factor banana plug. You will have a hard time finding a 5/16" D mounting pin/tip jack as that mounting is normally .250.

As UHOP mentioned that Keystone part appears to be a compatible replacement for the Kobicon, but if you have your heart set on only a pin jack, then good luck.


TM

[M Fowler]

http://www.jameco.com/z/6092-Keystone-E ... 82188.html

Not sure if they stock them.

[M Fowler]

http://www.ebay.com/itm/Insulated-Banan ... 2135.l4275

[ToneMerc]

http://www.ebay.com/itm/Insulated-Banan ... 2135.l4275

He wants the pin/tip jack, not a banana jack.....that's the issue.

TM

[glasman]

http://www.ebay.com/itm/Insulated-Banan ... 2135.l4275

He wants the pin/tip jack, not a banana jack.....that's the issue.

TM

Look on Mouser, they have the Kobicon jacks and I am pretty sure they have both banana and pin style.

This would probably work...

http://www.mouser.com/ProductDetail/Joh ... 6O436Zw%3d

Gary

[glasman]

Here is the drawing. Looks like it will fit the bill.

[M Fowler]

That part # drawing still looks to be 1/4 to me not 5/16.