Adding a Bias Control to SSS#002 CF Driver?
Moderators: pompeiisneaks, Colossal
Adding a Bias Control to SSS#002 CF Driver?
Hi guys, I've come up with a project for myself that isn't specifically a Dumble but rather one important aspect of the output section was inspired by hanging out on this forum whenever I need a break from the high gain world; that is to use the Dumble style cathode follower driver with a Boogie MarkIIC+ preamp/phase inverter. See this preliminary schematic I've come up with. What I am wonder if I could replace that 130k resistor to ground with a pot to achieve a variable bias control?
You do not have the required permissions to view the files attached to this post.