Brown note 44 clean channel question

[harris51]

I know its only a one channel amp but does anybody have a mod to get a little more hair out of the clean side of the amp? Thanks

[Smokebreak]

One channel D'lite?? Here's a good read for these sorts of things :http://www.regiscoyne.com/tech/preamp_mods/
Basically, you could increase plate reistors on 1st 2 stages(1st is already kinda high at 220K), and decrease the 220K grid resistor after the pot. Changing the cap in parallel with that resistor will allow different frequencies to be boosted too. Do you have the tone stack lift switch?(PAB). That will add some hair for sure