interest in precision power supply boards?

[steve_p]

Hi all, I wasn't sure if I should post this here, or in the classifieds. Mode, feel free to move.
I need a couple precision power supply pcbs, and I wanted to find out if anyone else would be interested in them as well. I would order from express PCB, so these would be 2 layer .062 boards with green soldermask and white silkscreening.

If you are interested, please post here or pm me.
Thanks, Steve

[Homebelly]

can you give an indication of cost and a time frame..?

[pamaz67]

i could be interested in a couple.
Pls. let me know the pricing and let me see the layout you're going to use.
Thanks

Paolo

[steve_p]

This is the beginings of the layout that I did. It is sized for F&T 220uf - 350V axials and panasonic 47uf 350V and 250V radials (7.5mm lead spacing).

I still need to add silkscreen to identify the different wire points. I sized the wire holes such that you could add a .125 keystone eyelet if you choose.

As far as cost goes, the total cost for 10 boards is about $300, of which I want 2-3 to keep. Lead time from expressPCB is based on their 10 day service. If you upgrade to 2-day service, cost for 10 boards is about $340 or so.

Domestic shipping should be minimal, 2-3 dollars or so. I am not sure about international.

I am not looking to make any money on these, I just need the boards and AGB amplifiers is not selling them at this time.

[steve_p]

Disregard....jborders just posted that he will have availability. So i won't be fabricating these.

Steve