Where do you set the Rock/ Jazz switch?
Moderators: pompeiisneaks, Colossal
-
carlygtr56
- Posts: 15
- Joined: Wed Jan 06, 2010 2:01 pm
- Location: Long Island, NY
Where do you set the Rock/ Jazz switch?
I'm curious. My findings are in the Rock position it more of a RF response, while I tend to favor the middle (bypass) position which trims the lows and is all out rock.
Re: Where do you set the Rock/ Jazz switch?
Doesn't the 'center off' Rock/Jazz basically remove the tone stack?
My Ceriatone didn't have a center off, so I added one - but then removed the switch entirely (enabling other use) as it seemed I could acquire the same tone with the tone pots and as I usually use the OD with PAB off.
My Ceriatone didn't have a center off, so I added one - but then removed the switch entirely (enabling other use) as it seemed I could acquire the same tone with the tone pots and as I usually use the OD with PAB off.
-
carlygtr56
- Posts: 15
- Joined: Wed Jan 06, 2010 2:01 pm
- Location: Long Island, NY
Re: Where do you set the Rock/ Jazz switch?
Yes, bypasses the tone stack.LPSGME wrote:Doesn't the 'center off' Rock/Jazz basically remove the tone stack?
My Ceriatone didn't have a center off, so I added one - but then removed the switch entirely (enabling other use) as it seemed I could acquire the same tone with the tone pots and as I usually use the OD with PAB off.
