Another new guy...

[Carlin Mitchell]

By the way.... I'm really glad I found this site..... I've registered with a few others and they all seem snobbish or completely dead. I work at a custom sign shop as a cnc router operator. I cut .125, .080, .063 aluminum sheet stock all day. I can get away with a little side project here and there. If anyone has any requests for chassis's, I can route them and break form them as well. I'd gladly do this in exchange for parts ((speaker ??)) to get an amp project started. I'm totally hyper focused on making on ... typical OCD, project mentality. Glad to have found similar minded people Thanks !!! Carlin.

[Fischerman]

That organ chassis looks like a good candidate for a 2xEL84 Rocket but you'd have to add a preamp tube. Or you could even simplify the preamp a little and go with two preamp tubes (something like the Trace Elliot Velocette). I believe Kevin O'Conner shows a 2 preamp tube AC30-ish circuit in TUT3 in the AC30 chapter (it's very similar to the Velocette circuit).