Supports for the earth bus bar>

[Mark]

https://tubeamparchive.com/viewtopic.ph ... ght=rocket

In the Rocket clone Allyn Meyer built in the above thread, he uses a pots which won't allow the earth bus bar to be soldered to it. It appears that Allyn is using a special washer to mount the earth bus bar slightly above the pots.

I find myself in a similar situation, where do I find these washers?

Thanks for your assistance.

[Blackburn]

Wow, you're right! I didn't notice that and I was looking at those pics a few days ago. Such a beautiful build. I'd like to know as well. Hopefully Allyn will chime in and tell us.

[M Fowler]

Yes you can get those on ebay or mouser.

[Blackburn]

Mark is the man!

I'm definitely getting some of those.

[M Fowler]

Yes they work great for PEC, Clarostat, and other pots. I used these on my Liverpool.

[Mark]

Where have you seen then on eBay or Mouser?

Thanks for all the replies and yes Allyn's is something else, it's a beautiful job.

[M Fowler]

http://www.newark.com/jsp/displayProduc ... 34621|plid|

http://www.mouser.com/ProductDetail/Amp ... 22K654Cw==

http://www.newark.com/jsp/search/produc ... 73341|plid|

http://www.alliedelec.com/search/produc ... u=70142869

http://www.ebay.com/itm/BAG-25-PCS-AMPH ... 0500567614

[Blackburn]

Funny thing about that last pic you posted, Mark. I saw that one on Mouser and in the specs it says 75 ohms.

http://www.mouser.com/Search/ProductDet ... ZwpQ%3d%3d

[M Fowler]

Funny thing about that last pic you posted, Mark. I saw that one on Mouser and in the specs it says 75 ohms.

http://www.mouser.com/Search/ProductDet ... ZwpQ%3d%3d

Yeah it's in the 75 ohm product series.

[M Fowler]

some how I got two posts.

[Aurora]

I've mentiones this before, but for those who may not know -
these ar accesories for BNC coaxial connectors - thus they are 75 ohms..

[Mark]

I could be wrong but the BNC coaxial connectors seem a bit short, the RF Connectors GROUNDING LUG looks like the ticket though.

I'll order some and see how it goes.

[M Fowler]

Yes the longer double one works the best just clip one side off. I can't find the single connector yet.

The last ones I bought I gut from a TAG member.

[M Fowler]

http://www.mouser.com/ProductDetail/Amp ... ZwpQ%3d%3d

https://tubeamparchive.com/viewtopic.ph ... ght=#69103

https://tubeamparchive.com/viewtopic.ph ... c&start=15