Tube Amp Archive

Thank u so much! The reverb is the same one that I got in my Mesa DC3 (Accutronics) In the DSL 201 the reverb on clean channel is too low, you can even hear it and it's very smooth. On the OD channel it's a little better. In my DC 3 on clean sounds better then on the OD channel. I am not happy with ...

Can anyone tell me what are the V2 V3 and V4 for? The V1 is half for the clean and half four overdrive i realize that. So can someone explain me which one is for the reverb, or which one is for the fx loop, etc...
THX

Only the Carbon Copy dealy is in the FX Loop!

All the pedals are allready in the front!

Hi, so when I put my MXR Carbon copy in the FX loop on both amps on the clean or OD channels of the amps everything is fine. But I use other pedals ( Pro Co RAT, Big Muff, TS 808 etc.) and when i use them (on a clean channel) the sound of my MXR Carbon copy delay is too low? You can even hear the de...

Hi, I'd like to know if I can pull away two EL 84 power tubes (like in the rectifier) to get the amp quieter? And if yes, do I need to pull away the central two?

I have a problem when I use EQ on my dc3. Even when the EQ is not in use the 2,3 and 4 slide pot's need to be on the top! If not there's a lot of noise and hum and harsh and... Especially when I play the tones A and B on my guitar. I changed all the tubes and checked the capacitors so no problems th...

Thx, the other question is: I have a bcb60 pedalboard, so I connect the guitar direct to the TS808 then to the DS2 and then direct in the amp right? And then from the amp's send to the pedalboard input, then from the pedalboard send to the delay, then from the delay to the pedalboard return and finn...

Hi, is it better to connect the TS 808 direct to the input of the amp, or is better to go through the send return of the amp?

No, it's not a hiss, it's like the noise you hear when you put the volume on max. I'll try to change the tubes on v1 with another one and let u know. Thanks anyway

The speaker is a brand new Celestion G12 Vintage 30, 8 ohm. I put it in a case with the connections on the top. Is it possible that the speaker is getting some noise because I put the connections on the upper case?

Hi, I changed all my tubes, changed the speaker and checked all the caps values and everything is ok, except when I use lead channel. When I put gain at 8, master 5, outpu 5, or more, I've got a lot of speaker noise! Is this normal at high volumes at the lead channel with gain set at 8? There's no m...